docs-desktop/dotnet-desktop-guide/framework/wpf/graphics-multimedia/path-markup-syntax.md

title, description, ms.date, helpviewer_keywords, ms.assetid

title	description	ms.date	helpviewer_keywords	ms.assetid
Path Markup Syntax	Learn about the powerful and complex mini-language you can use to specify compact path geometries in Windows Presentation Foundation (WPF).	03/30/2017	attribute usage in XAML [WPF] XAML [WPF], attribute usage graphics [WPF], PathGeometry class XAML [WPF], object element usage	b8586241-a02d-486e-9223-e1e98e047f41

Path Markup Syntax

Paths are discussed in Shapes and Basic Drawing in WPF Overview and the Geometry Overview, however, this topic describes in detail the powerful and complex mini-language you can use to specify path geometries more compactly using Extensible Application Markup Language (XAML).

Prerequisites

To understand this topic, you should be familiar with the basic features of xref:System.Windows.Media.Geometry objects. For more information, see the Geometry Overview.

StreamGeometry and PathFigureCollection Mini-Languages

WPF provides two classes that provide mini-languages for describing geometric paths: xref:System.Windows.Media.StreamGeometry and xref:System.Windows.Media.PathFigureCollection.

• You use the xref:System.Windows.Media.StreamGeometry mini-language when setting a property of type xref:System.Windows.Media.Geometry, such as the xref:System.Windows.UIElement.Clip%2A property of a xref:System.Windows.UIElement or the xref:System.Windows.Shapes.Path.Data%2A property of a xref:System.Windows.Shapes.Path element. The following example uses attribute syntax to create a xref:System.Windows.Media.StreamGeometry.

  [!code-xamlGeometrySample_snip_XAML#GraphicsMMStreamGeometryAttributeSyntaxInline]

• You use the xref:System.Windows.Media.PathFigureCollection mini-language when setting the xref:System.Windows.Media.PathGeometry.Figures%2A property of a xref:System.Windows.Media.PathGeometry. The following example uses a attribute syntax to create a xref:System.Windows.Media.PathFigureCollection for a xref:System.Windows.Media.PathGeometry.

  [!code-xamlGeometrySample_snip_XAML#GraphicsMMPathFigureCollectionAttributeSyntaxInline]

As you can see from the preceding examples, the two mini-languages are very similar. It's always possible to use a xref:System.Windows.Media.PathGeometry in any situation where you could use a xref:System.Windows.Media.StreamGeometry; so which one should you use? Use a xref:System.Windows.Media.StreamGeometry when you don't need to modify the path after creating it; use a xref:System.Windows.Media.PathGeometry if you do need to modify the path.

For more information about the differences between xref:System.Windows.Media.PathGeometry and xref:System.Windows.Media.StreamGeometry objects, see the Geometry Overview.

A Note about White Space

For brevity, a single space is shown in the syntax sections that follow, but multiple spaces are also acceptable wherever a single space is shown.

Two numbers don’t actually have to be separated by a comma or white space, but this can only be done when the resulting string is unambiguous. For instance, 2..3 is actually two numbers: "2." And ".3". Similarly, 2-3 is "2" and "-3". Spaces are not required before or after commands, either.

Syntax

The Extensible Application Markup Language (XAML) attribute usage syntax for a xref:System.Windows.Media.StreamGeometry is composed of an optional xref:System.Windows.Media.FillRule value and one or more figure descriptions.

StreamGeometry XAML Attribute Usage
< object property ="[ fillRule] figureDescription[ figureDescription]* " ... />

The Extensible Application Markup Language (XAML) attribute usage syntax for a xref:System.Windows.Media.PathFigureCollection is composed of one or more figure descriptions.

PathFigureCollection XAML Attribute Usage
< object property =" figureDescription[ figureDescription]* " ... />

Term	Description
fillRule	xref:System.Windows.Media.FillRule?displayProperty=nameWithType Specifies whether the xref:System.Windows.Media.StreamGeometry uses the xref:System.Windows.Media.FillRule.EvenOdd or xref:System.Windows.Media.FillRule.Nonzeroxref:System.Windows.Media.PathGeometry.FillRule%2A. - F0 specifies the xref:System.Windows.Media.FillRule.EvenOdd fill rule. - F1 specifies the xref:System.Windows.Media.FillRule.Nonzero fill rule. If you omit this command, the subpath uses the default behavior, which is xref:System.Windows.Media.FillRule.EvenOdd. If you specify this command, you must place it first.
figureDescription	A figure composed of a move command, draw commands, and an optional close command. moveCommand drawCommands [ closeCommand ]
moveCommand	A move command that specifies the start point of the figure. See the Move Command section.
drawCommands	One or more drawing commands that describe the figure's contents. See the Draw Commands section.
closeCommand	An optional close command that closes figure. See the Close Command section.

Move Command

Specifies the start point of a new figure.

Syntax
M startPoint - or - m startPoint

Term	Description
startPoint	xref:System.Windows.Point?displayProperty=nameWithType The start point of a new figure.

An uppercase M indicates that startPoint is an absolute value; a lowercase m indicates that startPoint is an offset to the previous point, or (0,0) if none exists. If you list multiple points after the move command, a line is drawn to those points though you specified the line command.

Draw Commands

A draw command can consist of several shape commands. The following shape commands are available: line, horizontal line, vertical line, cubic Bezier curve, quadratic Bezier curve, smooth cubic Bezier curve, smooth quadratic Bezier curve, and elliptical arc.

You enter each command by using either an uppercase or a lowercase letter: uppercase letters denote absolute values and lowercase letters denote relative values: the control points for that segment are relative to the end point of the preceding example. When sequentially entering more than one command of the same type, you can omit the duplicate command entry; for example, L 100,200 300,400 is equivalent to L 100,200 L 300,400. The following table describes the move and draw commands.

Line Command

Creates a straight line between the current point and the specified end point. l 20 30 and L 20,30 are examples of valid line commands.

Syntax
L endPoint - or - l endPoint

Term	Description
endPoint	xref:System.Windows.Point?displayProperty=nameWithType The end point of the line.

An uppercase L indicates that endPoint is an absolute value; a lowercase l indicates that endPoint is an offset to the previous point, or (0,0) if none exists.

Horizontal Line Command

Creates a horizontal line between the current point and the specified x-coordinate. H 90 is an example of a valid horizontal line command.

Syntax
H x - or - h x

Term	Description
x	xref:System.Double?displayProperty=nameWithType The x-coordinate of the end point of the line.

An uppercase H indicates that x is an absolute value; a lowercase h indicates that x is an offset to the previous point, or (0,0) if none exists.

Vertical Line Command

Creates a vertical line between the current point and the specified y-coordinate. v 90 is an example of a valid vertical line command.

Syntax
V y - or - v y

Term	Description
y	xref:System.Double?displayProperty=nameWithType The y-coordinate of the end point of the line.

An uppercase V indicates that y is an absolute value; a lowercase v indicates that y is an offset to the previous point, or (0,0) if none exists.

Cubic Bezier Curve Command

Creates a cubic Bezier curve between the current point and the specified end point by using the two specified control points (controlPoint1 and controlPoint2). C 100,200 200,400 300,200 is an example of a valid curve command.

Syntax
C controlPoint1controlPoint2endPoint - or - c controlPoint1controlPoint2endPoint

Term	Description
controlPoint1	xref:System.Windows.Point?displayProperty=nameWithType The first control point of the curve, which determines the starting tangent of the curve.
controlPoint2	xref:System.Windows.Point?displayProperty=nameWithType The second control point of the curve, which determines the ending tangent of the curve.
endPoint	xref:System.Windows.Point?displayProperty=nameWithType The point to which the curve is drawn.

Quadratic Bezier Curve Command

Creates a quadratic Bezier curve between the current point and the specified end point by using the specified control point (controlPoint). q 100,200 300,200 is an example of a valid quadratic Bezier curve command.

Syntax
Q controlPoint endPoint - or - q controlPoint endPoint

Term	Description
controlPoint	xref:System.Windows.Point?displayProperty=nameWithType The control point of the curve, which determines the starting and ending tangents of the curve.
endPoint	xref:System.Windows.Point?displayProperty=nameWithType The point to which the curve is drawn.

Smooth cubic Bezier curve Command

Creates a cubic Bezier curve between the current point and the specified end point. The first control point is assumed to be the reflection of the second control point of the previous command relative to the current point. If there is no previous command or if the previous command was not a cubic Bezier curve command or a smooth cubic Bezier curve command, assume the first control point is coincident with the current point. The second control point, the control point for the end of the curve, is specified by controlPoint2. For example, S 100,200 200,300 is a valid smooth cubic Bezier curve command.

Syntax
S controlPoint2endPoint - or - s controlPoint2endPoint

Term	Description
controlPoint2	xref:System.Windows.Point?displayProperty=nameWithType The control point of the curve, which determines the ending tangent of the curve.
endPoint	xref:System.Windows.Point?displayProperty=nameWithType The point to which the curve is drawn.

Smooth quadratic Bezier curve Command

Creates a quadratic Bezier curve between the current point and the specified end point. The control point is assumed to be the reflection of the control point of the previous command relative to the current point. If there is no previous command or if the previous command was not a quadratic Bezier curve command or a smooth quadratic Bezier curve command, the control point is coincident with the current point.

Syntax
T endPoint - or - t endPoint

Term	Description
endPoint	xref:System.Windows.Point?displayProperty=nameWithType The point to which the curve is drawn.

Elliptical Arc Command

Creates an elliptical arc between the current point and the specified end point.

Syntax
A size rotationAngle isLargeArcFlag sweepDirectionFlag endPoint - or - a size rotationAngle isLargeArcFlag sweepDirectionFlag endPoint

Term	Description
size	xref:System.Windows.Size?displayProperty=nameWithType The x- and y-radius of the arc.
rotationAngle	xref:System.Double?displayProperty=nameWithType The rotation of the ellipse, in degrees.
isLargeArcFlag	Set to 1 if the angle of the arc should be 180 degrees or greater; otherwise, set to 0.
sweepDirectionFlag	Set to 1 if the arc is drawn in a positive-angle direction; otherwise, set to 0.
endPoint	xref:System.Windows.Point?displayProperty=nameWithType The point to which the arc is drawn.

The Close Command

Ends the current figure and creates a line that connects the current point to the starting point of the figure. This command creates a line-join (corner) between the last segment and the first segment of the figure.

Syntax
Z - or - z

Point Syntax

Describes the x- and y-coordinates of a point where (0,0) is the top left corner.

Syntax
x , y - or - x y

Term	Description
x	xref:System.Double?displayProperty=nameWithType The x-coordinate of the point.
y	xref:System.Double?displayProperty=nameWithType The y-coordinate of the point.

Special Values

Instead of a standard numerical value, you can also use the following special values. These values are case-sensitive.

Infinity
Represents xref:System.Double.PositiveInfinity?displayProperty=nameWithType.

-Infinity
Represents xref:System.Double.NegativeInfinity?displayProperty=nameWithType.

NaN
Represents xref:System.Double.NaN?displayProperty=nameWithType.

You may also use scientific notation. For example, +1.e17 is a valid value.

See also

• xref:System.Windows.Shapes.Path
• xref:System.Windows.Media.StreamGeometry
• xref:System.Windows.Media.PathGeometry
• xref:System.Windows.Media.PathFigureCollection
• Shapes and Basic Drawing in WPF Overview
• Geometry Overview
• How-to Topics